Clik here to view.
Windchill Requirements for Digital Asset Management?
Hi, Curious if anyone out there is using Windchill for Digital Asset Management (DAM) and working with images, videos and audio files? If so, what methods, techniques or customizations have you...
View ArticleRe: Font to use in drawings
What does the recipient see when they don't have the same TTF? Missing characters or character substitutions. What's sad is the PTC could, but chooses not to**, define each character as a procedure...
View ArticleRe: Black Screen Cre0 Parametric 2.0
Ok well openGL is default, so did you try graphics win32_gdi?
View Articlehow to improve 3D modeling of circle
Hi, I find out that going fron a circle in 2D to 3D structure the arc definition is not really good. Do i need to use the Spline tool to rebuild the entire circle or there is another way. PS: sorry for...
View ArticleClik here to view.
Re: Font to use in drawings
A subset of the fonts are embedded in the PDF. This means only the characters actually used are stored in the PDF file. This insures that the PDF file can be viewed and printed as it looked when...
View ArticleRe: Font to use in drawings
I also tried this with a much larger (44 MB) drawing, but with virtually no text (just the title block). In this case there was very little difference in the PDF file size. TTF - 24.9 MBStroke - 25.0...
View ArticleRe: RE: Pro/Engineer Books
PTC used to have a command reference up to 18 or 2000i, but then so did Excel and Word. Turns out, most people don't like to read manuals, so they stopped publishing them. Also, it eats into selling...
View ArticleRe: how to improve 3D modeling of circle
If you sketched with the circle command in the Sketcher and revolve it, it's a circle, it sounds like you might be seeing display quality? Can you post a picture?
View ArticleRe: Creo and Windchill integrated window freezes...
I've been seeing this problem a lot with WF5/WC9.x. I looked at the processes with Sysinternals Process Explorer and sometimes see 16 byte IO blips at 5 second intervals from xtop.exe, but sometimes...
View ArticleHow to Install Windows on a Mac with Boot Camp
As you know, Creo is only supported on Windows. If you've got a Mac, here's a tip from one of my favorite sites on how to setup Windows on a Mac with Boot Camp....
View ArticleClik here to view.
Re: sheetmetal: "remove material normal to both driving and offset surfaces"...
If you make the surround 1st with a seam, the extrude does work properly. Then you build whatever you need for the "floor"
View ArticleClik here to view.
Re: MathCad Prime 3.0 functions
STEVEN LOMBARDI wrote: I just upgraded from Prime 2.0 to 3.0 and noticed that the function list for Fourier Transforms no longer contains FFT, fft, IFFT, ifft, cfft, CFFT, icfft, or ICFFT. Is this a...
View ArticleRe: return or not return? Is it a bug? Explanation needed!
See http://communities.ptc.com/message/190849#190849 pls
View ArticleRe: how to improve 3D modeling of circle
ITS ONLY A GRAPHICS DISPLAY ISSUE,Eric Terrell HAS EXACTLY ANSWERED THIS QUESTION,SETTING EDGE DISPLAY QUALITY TO VERY HIGH AND USING MORE POWERFULL GRAPHICS CARD COULD BE MORE BETTER.
View ArticleRe: surfacing
Thanks SteveThat does work but was just trying a different way by just creating a small patch surface. I projected a sketch onto the surface but don't know how to trim surface leaving just a small...
View Articleparallele Kante auf Arbeitsebene erzeugen wie?
Hallo zusammen, ich habe auf der Oberfläche eines Körpers mit Freiformkurvenbegrenzung eine Arbeitsebene gelegt.Auf dieser Arbeitsebene habe ich die Freiformkante des Körpers mit "3D-Geometrie -...
View ArticleClik here to view.
Help with PDEsolve!
I've been working on this file for a couple days now, but I'm not getting it to solve. I removed the reaction rate terms (R__) just to test and see if my mass balances were correct, by inputing dummy...
View Article