Re: MathCAD Prime 3.0 and 15
when you buy 15, you are given prime. Prime is marketed as mathcad. Yet, to work in prime is much different, and since I am comfortable with 15, that's what I (and many others) will use. If PTC is...
View ArticleRe: Color transfer through solidify
Thanks for your explanation. I checked the feature created by EMX and it's only a simple solidify. They have found a way to transfer the colors through Toollkit code somehow... However, the scenario 3...
View ArticleRe: January 2015 TC Meetings: Enhancement Requests for Creo
Hi, Could anyone here recall if there has been anything good implemented to Creo 3.0 from anyones ideas posted on these boards since 2011 and then onwards? Just for a reference on what's been...
View ArticleCreo 3.0 profile issues
We recently updated from Creo 2.0 to Creo 3.0 M020. We are seeing odd behavior using profile milling, specifically when multiple discrete surfaces are selected in the same profile sequence. The...
View ArticleClik here to view.
Re: Modeling a globoidal cam
Here is a very straight forward sinusoidal sweep with defined dwell times for a servo motor.the math gets a little tedious as you have to keep track of "t" within the process, but it is fairly easy to...
View ArticleClik here to view.
Re: Modeling a globoidal cam
...and as an aside, you can change the curve somewhat using power functions on the Cos statement. Here you have a hard start and a soft stop by brining the statement up to the power of 4. You can...
View ArticleRe: Creo / Pro-E Student edition help!
William is right. It installs fine but will not run. Any moderators have any input?
View ArticleRe: Multi sheet drawings
When I create a drawing and I tell it to use my format (or my template), it automatically starts with sheet one of my format. Then when I create subsequent sheets, it automagically gives me sheet 2...
View ArticleClik here to view.
Re: Multi sheet drawings
Now that's intereresting, Stephen. I wonder what's doing that for you. If you open your sheet 1 format file, does it have multiple sheets defined? Edit: that seems to do the trick. A second sheet in...
View ArticleRe: 404 error for software downloads
Hi everyone- The link has now been fixed! If you re-register, you will be taken to the Thank You page where the PDF link has been corrected. We're very sorry for the inconvenience,Stacie
View ArticleRe: Creo / Pro-E Student edition help!
Hi everyone- The link has now been fixed! If you re-register, you will be taken to the Thank You page where the PDF link has been corrected. We're very sorry for the inconvenience,Stacie
View ArticleIf you are getting a 404 Error...
Hi everyone- If you are trying to download PTC Creo 3.0 for universities and are getting a 404 error, the link has now been fixed! If you re-register, you will be taken to the Thank You page where the...
View ArticleClik here to view.
Windchill 10.3 (X-26)
Not sure if it will move, but the PTC Product Calendar now is listing a release target for the next version of Windchill. I'm also starting to see support documents discussing Creo Parametric 4.0. I...
View ArticleRe: Help: I Can't delete files!
Laurent, Were the generic file 501109 and the instance files P14007_... checked in to Windchill? If so, what release of Windchill are you using, 9.1?Can you explain the steps you followed? Thanks,Lee
View ArticleRe: Creo 3.0 profile issues
SPR 2253685 has been filed for this. The work around for the failed sequence is to set GOUGE_AVOID_TYPE TIP_ONLY. There is no reason setting this to TIP_&_SIDES should cause a failure (it works...
View ArticleRe: Planes and Axis' not visible.
Steven, As Doug mentioned one of the possible reason for axis is option display_axes no in config.sup. Regarding warning on start "Feature obtained" is to inform that the license for Routed_System_set...
View ArticleClik here to view.
Multi level Cables versus Single level Cables
I'm looking for more pros and cons on this issue. We have discovered an issue with Multilevel cables. On Multilevel cables, Creo Parametric "does not" read the cable diameter and minimum bend radius !...
View Article